Safety operation rules for grinding workshop of precision mold parts processing factory
Surface grinder processing choose Dongguan Chang'an Yize Mould. Focus on
precision mold parts processing for 15 years, combined with a variety of processing technology, at the same time has a set of strict processing flow, for customer quality and delivery escort. The following specific to take a look at the safety operation procedures of Yize flat grinding workshop.
In order to ensure the orderly production of the company, create a clean and fresh working environment for the staff, effectively improve the work efficiency and product quality of the staff, eliminate and prevent the occurrence of accidents,precision mold parts processing manufacturer Yize formulates this management system.
1. Basic precautions for safe operation
1.1 before operation, wear work clothes, fasten the buttons and cuffs, do not open the work clothes for operation, do not wear gloves, do not wear, take off or change clothes beside the machine tool, or surround the cloth on the body, so as to prevent the machine from wringing. Sandals and slippers are not allowed. Wear protective glasses to prevent eye injury caused by splashing iron chips;
1.2 the operator must be familiar with the operation sequence and performance of the machine tool, and it is strictly forbidden to use the equipment beyond the performance.
2. Preparation before work
2.1 before starting the machine, fill oil according to the equipment lubrication chart and check the oil level of the oil level.
2.2 check the handle, gear, switch and knob to ensure they are in the original position or the required position.
2.3 start the lubricating oil pump and hydraulic oil pump motor, check and adjust the pressure of hydraulic system, lubricating system and disk.
3. Safety precautions during work
3.1 manually raise and lower the grinding head, move the worktable horizontally, shift the carriage and adjust the gear switch.
3.2 before installing the new grinding wheel, check whether there are cracks and notches, and conduct secondary balance during installation. Check the relative position of diamond pen and grinding wheel.
3.3 jog the lifting mechanism of grinding head, shift horizontally, and adjust the limit block and switch.
3.4 check whether the manual grinding head is light, turn off the cooling nozzle, turn on the cooling pump, turn the transverse feed on, the worktable moves back and forth, start the motor of the grinding head, idle for 15 ~ 20 minutes, and check the temperature rise of the spindle of the grinding head.
3.5 stop the machine, stop the reciprocating motion, close the coolant nozzle for 2 ~ 3 minutes, close the motor of the grinding head, and after the grinding head stops, close the hydraulic oil pump, lubricating oil pump and cooling pump motor. Turn off the main electric control switch of the machine tool and the air switch of the electric control cabinet.
4. Precautions after work
4.1 after cleaning the machine tool, inject oil according to the equipment lubrication chart and smear oil on the disk. Return the handle switch, throttle valve and knob to the original position or closed position.
Good operating procedures and daily 5S management can make the processing more orderly and reduce errors. In a word,precision mold parts processing manufacturer choose Dongguan Yize mould Co., Ltd. In addition to surface
grinding processing, there are many other processing methods, such as CNC processing, milling machine fast wire processing, PG processing, EDM, internal and external grinding, wire cutting, lathe processing and slow machining Wire processing and so on, equipped with imported precision processing equipment, to provide customers with a wide range of precision processing technical support.