What are the processing procedures for non-standard round parts?

In the process of parts processing, a relatively high surface is required for machining accuracy or surface quality requirements, so what are non-standard round parts process?

1. Non-standard round parts process-fast wire processing

Processing principle and use: Use molybdenum wire to perform small-area contour processing of metal parts through electrical energy erosion.

Accuracy mm: 0.05

Processing coverage: blanking, cutting, breaking, and roughing of the part shape.

2. Non-standard round parts process-fine hole electric discharge machining

Processing principle and use: Use small copper tubes to perforate metal parts by 0.1-3.0mm through electric discharge.

Accuracy mm: 0.05

Processing coverage: parts threading small holes, avoiding holes.

3. Non-standard round parts process-surface grinding

Machining principle and application: Use the motor's rotational power to be transmitted to the grinding wheel to grind the material. The grinding wheel can be shaped with a diamond trimmer, and the formed grinding wheel can cut the contour of the part.

Accuracy mm: 0.001

Processing coverage: machining of various contours of parts, steps, slopes, arcs, small grooves, planes, etc.

4. Non-standard round parts process-fine carving processing

Processing principle and use: Use the motor's rotating power to transmit to milling cutters of various materials and shapes to process copper and aluminum materials.

Accuracy mm: 0.005

Processing coverage: roughing or finishing of copper and aluminum parts

The quality of the processing will directly affect the final quality of the parts. Our company has set up a special procurement and production management department to arrange production, and control the processing and production of non-standard round parts throughout the process.