Fitting Tube Outer Diameter: 1, 3/4, 1/2, 3/8, 1/4 in
Operating Temperature Range: -40℃~240℃(-40℉~464℉)
Maximum Operating Pressure: 1.5 MPa(217.56 psig/15 bar)
Material: PFA
Application: Chemical, food, medical, environmental protection, water treatment, solar energy, electric power and many other fields.
Characteristics:
1. The working temperature ranges from -40℃ to 240℃, adapting to most working environments;
2. Resistant to physical wear and chemical corrosion;
3. High purity and transparency allows easy observation of the liquid flow inside the tube;
4. Simple installation, thus reducing system complexity and cost;
Product Details:
| ||||||||
| Item Name | Specification | Tube Size (mm) | Tube Size | A(mm) | B(mm) | C(mm) | D(mm) | E(mm) |
| KNS-A-Y-I-L-1 | 1" | 25.4 × 22.2 | 1" × 7/8" | 132.4 | 66.2 | 49.8 | 22.2 | 32.2 |
| KNS-A-Y-I-L-3/4 | 3/4" | 19 ×15.8 | 3/4" × 5/8" | 111.7 | 55.85 | 39.8 | 15.85 | 24.8 |
| KNS-A-Y-I-L-1/2 | 1/2" | 12.7 × 9.5 | 1/2" × 3/8" | 86 | 43 | 30.8 | 9.5 | 17 |
| KNS-A-Y-I-L-3/8 | 3/8" | 9.53 × 6.33 | 3/8" × 1/4" | 73 | 36.5 | 27 | 6.33 | 13.8 |
| KNS-A-Y-I-L-1/4 | 1/4" | 6.35 × 3.95 | 1/4" × 5/32" | 57.6 | 28.8 | 19.5 | 3.95 | 11 |
For more details, you can click here→
PFA Tube Fittings.pdf
FAQS
Q: What needs to be provided for a precision mold quote?
A: Usually you need to provide 2D drawings and 3D drawings to us for faster mold quotation and manufacturing. Supported 2D drawing formats are: AI, PDF, DWG, CAD, DXF, DLG, etc. Supported formats for 3D drawings are: STP, IGS, etc.
Q: We don't have product drawings, only samples, can you process them?
A: We offer sample processing, but providing 2D or 3D drawings will allow us to understand your needs more accurately and quote faster.
Q: How about your mold making capability?
A: We have professional mold designers, and experienced technicians. There are more than 130 personnel and more than 180 sets of imported advanced mold manufacturing equipment. To see more information, you can click here.
Q: What plastics can you process for injection molding?
A: The injection molding materials we can process are: PFA, PTFE (Teflon), PA66, PEI, PVDF, PBT, POM, PPS, PEEK, LCP, PPSU, and so on.
Q: What if the processed mold does not meet the requirements?
A: Our factory strictly installs the accuracy of the drawings provided by the customer for manufacturing, but also with the customer to communicate the use of molds and precision requirements, if there is a mold does not meet the customer's requirements, if it is a problem with our manufacturing, we are responsible for arranging to redo. But if it is due to the buyer's drawings are incorrect leading to the scrapping of the product will be negotiated separately.
↓CONTACT US↓
