In 2022, as PVDF becomes more and more important in emerging applications, the proportion of PVDF consumed in the traditional coating field is decreasing to only 30%. In the same year, the proportion of PVDF consumed by lithium batteries rose to 39% from 8% in 2017; and the proportion of PVDF consumed by photovoltaic backsheet membranes rose from 3% to 6%. This all shows that the PVDF industry is undergoing great changes, and we believe that in the future, PVDF can also shine in more applicati…

In the previous article we introduced two kinds of plastics, PFA and PTFE, and gave a detailed account of the properties and uses of these two kinds of plastics, and today we will introduce the second most used fluoroplastic: PVDF.

In this article, we will introduce the performance of six types of medical plastics, namely PVC, PE, PS, PP, PTFE and PEEK.

PTFE is currently the most used fluoroplastics, occupying about half of the market share, in the future there are still new growth points.

In this article we will introduce the classification of medical devices and performance requirements of commonly used medical plastics.

We used heavy objects to flatten this plastic plate after processing, and finally met the flatness requirements.

In our previous article, we introduced the wide range of applications for PFA, such as chemical processes, oil and gas industry, electrical insulation materials, etc.. However, until today, the market share of PFA in fluoropolymers is still less than 1%, while PTFE occupies about half, why? Today, we will explore the difference between PFA and PTFE in physical and chemical properties in this article, and answer the reasons for such a huge difference in market share between PFA and PTFE.

Yize Mould decided to enter the medical injection molding industry a few years ago. However, in the process of entering the medical injection molding industry, we encountered some technical difficulties.And we finally overcame them.

In industry, PFA is often used as various coatings, linings and even astronautical equipment due to its chemical stability, thermal stability and non-stick properties, and is widely used in many fields such as construction, chemical, mechanical, electrical, aerospace and medical. In addition, the cleanliness level of PFA is often higher than that of PTFE, so in recent years PFA has also begun to be used in the semiconductor industry, which are used for handling silicon wafers for ultra-large-s…

At present, the first batch of our patented products (PFA straight connector) has been successfully put into production, there are five models: 1", 3/4", 1/2", 3/8", 1/4", the working temperature range is up to -40℃~240℃ (-40℉~464℉), and the maximum working pressure is up to 1.5MPa. The rest of the pipe connectors will be successfully put into production within one year. Successfully put into production. Welcome to contact us.

Wire drawing dies, made of tungsten carbide, are tools used for drawing steel wires. They consist of a die blank and a die case. The quality of wire drawing dies, including the geometric shape and surface finish of the orifice, greatly affects the surface quality of the steel wire and the smoothness of the drawing process. It also has a certain impact on the mechanical properties of the wire and power consumption. Additionally, due to their relatively high cost, the service life of wire drawin…

In the forming process of fasteners, cold heading (extrusion) technology is a primary manufacturing process. Cold heading (extrusion) belongs to the category of metal forming under pressure. In production, external force is applied to the metal at room temperature, causing it to take shape within a predetermined die. This method is commonly known as cold heading.