In the field of plastic mold manufacturing, mold deformation is a common yet troublesome issue. So, Yize Mould, as a plastic mold factory, how can we precisely implement strategies to effectively avoid this problem?

Color change, a troublesome issue in plastic injection molding, directly affects product appearance and market acceptance. It refers to the discrepancy between the surface color of molded parts and the desired color. This phenomenon can be triggered by multiple factors, encompassing injection molding machines, plastic molds, molding processes, and raw materials.

Cracks, narrow fissures appearing on injection-molded parts, can stem from issues with the injection molding machine, mold, molding process, and raw materials.

In the field of injection molding, a phenomenon known as "silver streak" often plagues manufacturers. It manifests as silver-white stripes on the surface of injection-molded parts, actually left by low-molecular volatiles, water vapor, and other gases during the molding process.

Flow marks in the world of injection molding are like unexpected "imprints" that quietly appear on the surface of plastic parts. Their root cause lies in the subtle interaction of injection pressure and flow speed within the mold cavity. Today, let us together uncover the mystery of flow marks, delve into their causes, and explore effective solutions.

In the realm of injection molding, the issue of top whitening stands out as an unsightly flaw that not only affects the product's aesthetic appeal but also weakens its chemical resistance and mechanical properties. This article delves deeply into the causes of top whitening and provides a series of effective solutions.

Flash, also known as burr, is typically caused by the following reasons:

Bubbles in injection molding can be addressed through several strategies, depending on their causes:

Warpage and deformation of injection-molded products pose significant challenges. Primarily, mold design optimization is key, while adjustments to molding conditions offer limited improvements. Below, we delve into the causes of warpage and deformation and effective strategies to address them:

Injection molding process, burns occur from time to time, its causes are diverse, the solution is also different.First, mechanical factors may cause burns. For example, overheating of the barrel caused by abnormal conditions can cause the resin to decompose at high temperatures and cause burns when it is injected into the product. In addition, stagnant flow of resin from nozzles, screw threads, and check valves in the barrel may be carried into the product after decomposition and discoloration…

Cracking, a common flaw in plastic products, stems from stress deformation, primarily caused by residual stress, external stress, and environmental factors.

The production of medical mould injection components is vital to medical safety and quality. Therefore, manufacturers must strictly adhere to the following standards: